Li-Ion Battery - Shark Hydrovac WD200 Serie Guia Del Usuario

1. Align the Pole with the opening in the
Main Body and insert firmly until it clicks
into place.
Handle
Pole
(Click)
Main Body
Nozzle
NOTE: When assembling your HydroVac, there may be a little water in or around the water tanks. This is because we test all
our HydroVacs before you buy them to ensure the highest quality.
NOTE: To remove the handle, press the release button located on the back of the unit with a thin tool while pulling up on the
handle.
ASSEMBLY
2. Place the Dock on the floor near a wall
outlet and plug in the cord. Wind the
remaining cord around the Cord Wrap
on the back of the dock.
Prior to first use, charge the battery completely. A full charge takes approximately 4 hours.
Cord Wrap
Dock
NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.

LI-ION BATTERY

LED BATTERY POWER AND CHARGING INDICATOR
Charging
Low Charge
Mid Charge
Nearly Full
Full Charge
Note: Full Charge takes approximately 4 hours.
In Use
Full Charge
Mid Charge
Nearly Empty (Pulsing)
No Charge