Publicidad
Idiomas disponibles
Idiomas disponibles
2 - INSTALLATION
2.1 - HOW TO TRANSPORT THE CONDITIONER
• Transport and handling of the appliance must be carried out in vertical
position.
If it is transported in a horizontal position, wait at least one hour before starting
it.
• Before moving or transporting the appliance, completely drain condensation
by working as described in paragraph 4.2.a
CAUTION
Moving the air conditioner on delicate flooring (e.g. wooden flooring):
• Completely drain condensation.
• Take great care when moving the conditioner as the wheels could mark the
flooring. Although the wheels are made from a rigid material and are swivelling,
they could get damaged by use or excessive dirt.
It is recommended to check that the wheels are clean and that they can move
freely.
2.2 - WARNINGS
A failure to respect what follows may cause damages to the appliance.
a. Install the air conditioner on flat and stable surfaces and on the floor.
b. Only connect the air conditioner to power sockets equipped
with a ground system.
c. Make sure that curtains or other objects do not obstruct the
air suction filters (Fig.7).
d. Make sure to keep a minimum distance of 20/30 cm (Fig.1)
between the air conditioner and the adjacent figures.
e. The appliance must always be activated paying attention that there are no obstacles
for air suction and output.
f. The air conditioner must not be used in laundries.
g. The air conditioner must be installed in a dry place only.
h. The air conditioner must not be started in presence of dangerous materials, steams
or liquids.
i. Clean the air filters at least once a week.
EN - 12
Publicidad
