Newlux WindPure Mist W500 Smart Manual Del Usuario página 27

Device operation
2
3
7
8
11
LED screen
When you connect the fan to the power supply unit, the display (1)
lights up and the device enters standby mode.
You can control it with the touch control panel or with the remote
control.
• Press the ON/SPEED button
• To select the speed - level: low, medium or high - press the ON/
SPEED button
V1 = Low speed V2 = Medium speed V3 = High speed
• Press the OFF button (6) to turn off the fan.
• Press the SWING button
to stop the oscillation, press the ROTATE button again.
Maximum angle: 70º.
1
5
4
10
6
9
(7) ) and the fan will start running.
(7) several times.
to rotate from side to side. If you want
1. Display
2. Mode icon
3. Speed icon
4. Oscillation icon
5. Humidifier icon
6. OFF/Stand-by button (when
lit)
7. ON/SPEED button
8. TIMER button
9. ROTATE button
10. MIST button
11. Remote control sensor
27 |