TOPDON BT200 Manual Del Usuario página 17

MEASURING RANGE
The Battery Tester can perform test on batteries rated
within 100-2000CCA/30Ah-220Ah.
Measure
Standard
CCA
BCI
CA
MCA
JIS
WARNINGS
● DO NOT place the tester near the engine or exhaust
pipe to avoid damage by high temperatures, when
the car engine is running.
● DO NOT smoke, cause sparks, or strike matches near
the battery when testing.
● DO NOT remove battery clamps while testing.
● DO NOT put the tester into a highly humid, dusty
environment.
● DO NOT disassemble the tester, or may cause damage.
FCC Warnings:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
Measure
Range
100-2000
100-2000
100-2000
100-2000
26A17-245H52
Measure
Standard
DIN
IEC
EN
SAE
GB
Measure
Range
100-1400
100-1400
100-2000
100-2000
30-220Ah
EN I 17