Publicidad
Idiomas disponibles
Idiomas disponibles
USE OF THE HELMET
The use of an ASTM or SNELL certified helmet is recom-
mended, the helmet must be worn at all times when
riding your scooter.
The correct helmet should: Image 1
• Be comfortable
• Have good ventilation
• Fit correctly
• Covers the forehead
Incorrect helmet position: Image 2
• The helmet does not cover the forehead
image 1
ARMED:
1. Please connect the power cord carefully following the arrows.
2. Assemble the tube to the scooter taking care not to crush the cable
3. Tighten the front and rear handlebar base bolts.
Before using your scooter remember: Put it on charge (for safety the
scooter does not start while in charging).
PANEL:
On o :
Hold the button down for 3 seconds.
Turn on/o front and rear light:
Press the button twice.
Speed change: Press the button once.
Speed 1: 9 Km/h White light.
Speed 2: 15 km/h Red light.
Speed 3: 23 km/h White and red light.
Switch to Miles or KM: Press the button 3 times.
USE:
• To move forward, gain momentum and then press the accelerator
of your scooter.
• To brake you can use the brake located on the handle left.
• To store it, just pull the lever of the folding mechanism (3) down and
bend the handlebar tube to match the handlebar lock (14) with the
stop of the lock (9) until hear a click.
image 2
• To unfold it, repeat the previous point in the opposite way and
secures the lever of the folding mechanism.
Publicidad
