Programming The Master Code; Programming The User Code; Opening The Safe - ExecutiveSafe ACS-2 Manual De Usuario

Programming the MASTER CODE

For your safety, please program the master code before start using the safe.
The safe is shipped with the preprogrammed MASTER Code 000000.
The Master Code must be a 6-digit number.
With the safe door open, press the "CLEAR" button twice, the screen will display "PROG",
Enter the preprogrammed Master Code and then press the "LOCK" button, the display will show
"NEU".
Within 5 seconds after the disappearance of the "NEU" on the display, enter your new master code
(must be 6 digits) and then press the "LOCK" button, the display will now show "AGAIn".
Within five seconds after the disappearance of "AGAIn" on the display, re-enter the new password
and then press "LOCK", the display will now show "dONE", indicating that
the new master code has been programmed successfully.
The previous programmed master code is deleted.
If you have made a mistake then the programming of the master code needs to be repeated.
Test the master code you just programmed with the door open.

Programming the USER CODE

The safe is shipped with a preprogrammed USER Code 1234.
Close the door, and enter any 4 to 6-digit combination, called the USER CODE, and then press the
"LOCK" button.
The display screen shows the Greek character "Ξ" moving from right to left, and the bolts start to
automatically extract. After the bolts extracted completely closing the safe smoothly, the screen
will display "Close" and the user code will be displayed. The safe is now locked with the
programmed user code.
Test the combination you just programmed with the door open.
Note: The safe can be locked by simply pressing the "LOCK" button.
The safe will close automatically maintaining the last USER CODE programmed.

Opening the Safe:

To open the safe, enter the preprogrammed Master Code or User code, the display screen shows
the Greek Character "Ξ" moving from left to right. At the same time, the bolts start to
automatically retract. After the bolts retracted completely and smoothly, the "OPEn" is displayed
on the screen and the safe is now open.
Lock Out Function
If the wrong 6-digit combination is entered, the display will show "Error".
If the wrong 6-digit combination is entered 4 consecutive times the safe will enter the lockout
function for 3 minutes.
The keypad will become inactive and the display will blank. If a key is pressed the display will
show Hold3 or Hold2 or Hold1 indicating the number of minutes left for the lock out period to
expire and for the keypad to become active again.