Error Messages - ExecutiveSafe ACS-2 Manual De Usuario

Blanking Function
Press the "0" and then the "LOCK" button, the blanking function is now activated, and any number
pressed on the keypad will be displayed as a "-"
Press the "9" and then the "LOCK" button, the blanking function is now deactivated, and any
number pressed on the keypad will be displayed on the screen.
The blanking function is only active for the current operation, the next operation will not have the
blanking function unless is activated again by pressing the "0" and then the "Lock" buttons.
Programming the Date and Time
With the door open, Press the "CLEAR" button twice, the display will show
PROG and then enter the code "45" and then press the "LOCK" button.
The display will show the Date in the following format:
Day (first 2 digits), Month (middle 2 digits), Year (last 2 digits), in this case 060204 means 6
February 2004.
0 6 0
Enter the correct current Date and then press the LOCK button to go to the next screen.
The display will now show the current Time: Hour (24) first two digits, Minutes the middle two
digits and Seconds the last two digits, in this case 14 (h):25 (min):36 (sec).
1 4 2
Enter the correct time and press the "LOCK" button to exit the time and date and time set up.
Current Date and current time are now being recorded.

Error Messages

Error - Indicates a password error and needs to be re-entered correctly.
Error1 - Indicates that the bolts cannot be retracted properly. Push the door panel with your hand
to free the bolts and then re-operate the door.
Error2 - Indicates that the bolts are blocked and the locking of the safe cannot be completed.
Hold the door closed and attempt to relock it.
2 0 4
5 3 6
th
of