Connecting The Transmitter - Trevi FRS 1240 Manual De Instrucciones

ENGLISH

CONNECTING THE TRANSMITTER

The transmitter can be connected to various audio sources: TV sets,
laptops, media players, stereo systems, etc.
The cable ends with a stereo jack which is suitable for connection to all
devices with headphone jacks or signal with a diameter of 3.5 mm (eg:
MP3 players, televisions, portable CD).
POWER TRANSMITTER
1. Connect the external power supply to the socket (2) on the back of the
transmitter.
2. Plug the power adapter into a power outlet 230V ~ 50Hz.
Power outlet
230V ~ 50Hz
PUTTING THE TRANSMITTER
The figure shows the approximate range of the infrared transmitter. The
listening position should be within the area indicated.
The infrared rays do not pass through walls or opaque glasses for which
reception is possible only when between the transmitter and the headset
there are no obstacles.
The sun and the halogen lamp emitting infrared radiation that could
diturbare the device. It should therefore avoid directly exposing the unit to
sunlight or the light of halogen lamps.
Power supply input
12V
View from above
TV, HI-FI, DVD players, HI-FI System
Computers, CD players
Audio cable
side view
FRS 1240
Connector RCA,
and jack 3,5 mm
12 meters