Publicidad
HDMI™ Repeater
EN
Amplificateur de Signal HDMI™
FR
rect sunlight, microwaves, vibrations and mechanical
pressure.
• In case of questions, defects, mechanical damage, trou-
ble and other problems, non-recoverable by the docu-
mentation, contact your dealer or producer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against
accidental use.
Heat storage
• Do not cover the product.
• Keep enough space around all devices for a good vent-
lation and free motion and to avoid damages.
2 Description and function
2.1 Product
The product is an HDMI™ signal amplifier for extending an
HDMI™ connection. The signal amplifier is powered via the
HDMI™ connections. Item 58492 can additionally be po-
wered via the micro USB connector for use as an active si-
gnal amplifier.
2.2 Scope of delivery
58491: HDMI™-Repeater 4K @ 30 Hz, User Manual
58492: HDMI™-Repeater 4K @ 60 Hz, Charging cable,
User Manual
2.3 Operating Elements
See Fig. 1.
1 HDMI™ socket (input)
2 HDMI™ socket (output)
3 LED status indicator
3 Intended use
This product is intended exclusively for private
use and its intended purpose. This product is not
intended for commercial use. We do not permit
using the device in other ways like described in chapter
„Description and Function" or in the „Safety Instructions".
Use the product only in dry interior rooms. Not attending to
these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and in-
tegrity.
2. Compare the specifications of all used devices and en-
sure compatibility.
5 Connection and operation
See Fig. 2.
1. Connect a source device to the HDMI™ socket (input)
(1) of the repeater.
2. Connect an output device to the HDMI™ socket (output)
(2) of the repeater.
Connection cables are not included in the scope of delive-
ry. Make sure that the source and output devices as well
as the connection cables support the resolutions and stan-
dards of the product! Observe the maximum transmission
distances and resolutions.
Item 58492 has a micro USB socket (4) that allows you to
connect an additional power source (5 V
the item as an active signal amplifier and improve perfor-
mance. The use of an additional power source is recom-
mended. When power is supplied to the signal amplifier,
the LED status indicator (3) lights up blue.
A charging adapter is not included in the scope of delivery.
6 Maintenance, Care, Storage and
Transportation
The product is maintenance-free.
NOTICE!
• Only use a dry and soft cloth for cleaning.
REV2022-10-26
Subject to change without notice. |
V1.0aw
Sous réserve de modifications.
4 Micro USB socket
5 Charging cable
, 1 A) to use
Material damage
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
According to the European WEEE directive, electri-
cal and electronic equipment must not be disposed
with consumers waste. Its components must be re-
cycled or disposed apart from each other. Otherwi-
se contaminative and hazardous substances can damage
the health and pollute the environment.
As a consumer, you are committed by law to dispose elect-
rical and electronic devices to the producer, the dealer, or
public collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol
on the product, in the user manual, or at the packaging all-
udes to these terms. With this kind of waste separation, ap-
plication, and waste disposal of used devices you achieve
an important share to environmental protection.
WEEE No: 82898622
1 Consignes de sécurité
Le mode d'emploi fait partie intégrante du produit et com-
prend d'importantes informations pour une bonne installati-
on et une bonne utilisation.
• Lisez le mode d'emploi attentivement et complètement
avant de l'utiliser.
Le mode d'emploi doit être disponible à des incertitudes et
transfert du produit.
• Conservez soigneusement ce mode d'emploi.
• Ne pas ouvrir le boîtier.
• Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il
doit au contraire être protégé contre toute utilisation invo-
lontaire.
• Utilisez le produit, pièces et accessoires des produits
uniquement en parfait état.
• Éviter des conditions extrêmes, telles que la chaleur ex-
trême et froid, l'humidité et de la lumière directe du so-
leil, ainsi que microondes, des vibrations et de la pres-
sion mécanique.
• En cas de questions, les défauts, les dommages méca-
niques, des ingérences et d'autres problèmes, non ré-
cupérables par la documentation, contactez votre re-
vendeur ou le producteur.
Non destiné à des enfants. Le produit n'est pas un jouet !
• Sécuriser l'emballage, petites pièces et l'isolation contre
l'utilisation accidentelle.
Accumulateur de chaleur
• Ne couvrez pas le produit.
• Laissez toujours suffisamment d'espace qu'autour du
système afin de garantir une ventilation appropriée et
de l'espace entre les appareils pour ne pas risquer de
les dommager.
2 Description et fonction
2.1 Produit
Le produit est un amplificateur de signal HDMI™ permet-
tant d'étendre une connexion HDMI™. L'amplificateur de
signal est alimenté par les connexions HDMI™. L'article
58492 peut en outre être alimenté via le connecteur micro
USB pour être utilisé comme amplificateur de signal actif.
2.2 Contenu de la livraison
58491: Amplificateur de Signal HDMI™ 4K @ 30 Hz,
Mode d'emploi
58492: Amplificateur de Signal HDMI™ 4K @ 60 Hz,
Câble de charge, Mode d'emploi
- 3 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
58491, 58492
Goobay® by Wentronic GmbH
Publicidad
