Publicidad
Manual HDMI™ Switch 2 to 1
EN
Commutateur HDMI™ Manuel 2 sur 1
FR
• Do not short-circuit connectors and circuits.
Do not operate a device if it is not in working order. In such
cases, it must be secured against unintentional further use.
• Use product, product parts and accessories only in per-
fect condition.
• Avoid stresses such as heat and cold, moisture and di-
rect sunlight, microwaves, vibrations and mechanical
pressure.
• In case of questions, defects, mechanical damage, trou-
ble and other problems, non-recoverable by the docu-
mentation, contact your dealer or producer.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against ac-
cidental use.
Heat storage
• Do not cover the product.
• Keep enough space around all devices for a good ventla-
tion and free motion and to avoid damages.
2 Description and function
2.1 Product
The product is a bidirectional HDMI™ switcher that trans-
fers either 1x HDMI™ input signal to 2x HDMI™ output de-
vices or optionally 2x input signals to 1x output device. Pow-
er is supplied via the HDMI™ sockets. The product cannot
be used as a splitter.
2.2 Scope of delivery
58485: Manual HDMI™ Switch 2 to 1 (4K @ 30 Hz),
User Manual
58486: Manual HDMI™ Switch 2 to 1 (4K @ 60 Hz),
User Manual
2.3 Operating Elements
See Fig. 1.
1 Switch button
2 LED status indicators
3 HDMI™ socket
4 HDMI™ socket
Channel 1
3 Intended use
This product is intended exclusively for private use
and its intended purpose. This product is not inten-
ded for commercial use. We do not permit using
the device in other ways like described in chapter „Descripti-
on and Function" or in the „Safety Instructions". Use the pro-
duct only in dry interior rooms. Not attending to these regu-
lations and safety instructions might cause fatal accidents,
injuries, and damages to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and in-
tegrity.
2. Compare the specifications of all used devices and en-
sure compatibility.
5 Connection and operation
See Fig. 2.
There are 2 ways to use the switch box.
You can either transmit 1x input signal to 2x output devices
or alternatively 2x input signals to 1x output device.
Variation A: 1x input signal to 2x output devices
1. Connect one source device to the HDMI™ socket (3) of
the switch box.
2. Connect two output devices to the HDMI™ sockets
Channel 1 (4) and Channel 2 (5) of the switch box.
The input signal is displayed on one of the output devices.
3. Press the switch button (1) to switch between the out-
put devices.
The LED status indicators (2) light up when the respective
HDMI™ socket is active.
Variation B: 2x input signals to 1x output device
1. Connect two source devices to the HDMI™ sockets
Channel 1 (4) and Channel 2 (5) of the switch box.
2. Connect an output device to the HDMI™ socket (3) of
the switch box.
One of the input signals is displayed on the output device.
REV2022-10-20
Subject to change without notice. |
V1.0aw
Sous réserve de modifications.
5 HDMI™ socket
Channel 2
3. Press the switch button (1) to switch between the in-
put signals.
The LED status indicators (2) light up when the respective
HDMI™ socket is active.
Connection cables are not included in the delivery. Make
sure that the source and output devices as well as the con-
nection cables support the resolutions and standards of
the product! Observe the maximum transmission distances
and resolutions.
6 Maintenance, Care, Storage and
Transportation
The product is maintenance-free.
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
7 Disposal instructions
According to the European WEEE directive, electri-
cal and electronic equipment must not be disposed
with consumers waste. Its components must be re-
cycled or disposed apart from each other. Otherwise
contaminative and hazardous substances can damage the
health and pollute the environment.
As a consumer, you are committed by law to dispose electri-
cal and electronic devices to the producer, the dealer, or pu-
blic collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol
on the product, in the user manual, or at the packaging all-
udes to these terms. With this kind of waste separation, ap-
plication, and waste disposal of used devices you achieve
an important share to environmental protection.
WEEE No: 82898622
1 Consignes de sécurité
Le mode d'emploi fait partie intégrante du produit et com-
prend d'importantes informations pour une bonne installati-
on et une bonne utilisation.
• Lisez le mode d'emploi attentivement et complètement
avant de l'utiliser.
Le mode d'emploi doit être disponible à des incertitudes et
transfert du produit.
• Conservez soigneusement ce mode d'emploi.
• Ne pas ouvrir le boîtier.
• Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il
doit au contraire être protégé contre toute utilisation invo-
lontaire.
• Utilisez le produit, pièces et accessoires des produits
uniquement en parfait état.
• Éviter des conditions extrêmes, telles que la chaleur ex-
trême et froid, l'humidité et de la lumière directe du so-
leil, ainsi que microondes, des vibrations et de la pressi-
on mécanique.
• En cas de questions, les défauts, les dommages mécani-
ques, des ingérences et d'autres problèmes, non récupé-
rables par la documentation, contactez votre revendeur
ou le producteur.
Non destiné à des enfants. Le produit n'est pas un jouet !
• Sécuriser l'emballage, petites pièces et l'isolation contre
l'utilisation accidentelle.
Accumulateur de chaleur
• Ne couvrez pas le produit.
• Laissez toujours suffisamment d'espace qu'autour du
système afin de garantir une ventilation appropriée et de
l'espace entre les appareils pour ne pas risquer de les
dommager.
- 3 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
58485, 58486
Material damage
Goobay® by Wentronic GmbH
Publicidad
