Techno Line WT 235 Manual De Instrucciones página 17

Please note:
 In the process of receiving the RCC, except the "
until press and hold down the "-" button for 2 seconds, to exit the RCC receiver function.
 If the clock cannot receive the DCF signal (because the distance is too great to receive a signal from
the transmitter in Colorado), you have the option of setting the time manually as mentioned above.
As soon as the reception of the DCF signal is possible, then the clock is readjusted automatically.
 We recommend a minimum distance of 2.5 meters(8.2 Feet) to all sources of interference, such as
televisions or computer monitors, Radio reception is weaker in rooms with concrete walls and in
offices. In such extreme circumstances, place the system close to the window.
Hereby, Technotrade declares that this product WT235 is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU and ROHS 2011/65/EC. The original EU declaration of
conformity may be found at: www.technoline.de/doc/4029665002354
" key, any buttons are not functional,
EN 7