Ferroli ROMEO N RF Manual De Usuario página 80

Set temperature level exclusion
During automatic operation the room temperature value can be temporarily changed by pressing the buttons
/ in 0.1°C increments. By keeping the button pressed the temperature will change rapidly. The exclu-
sion function, indicated on the display by the symbol
Manual heating operation (in Winter mode)
To use the REMOTE at a fixed room temperature level, press the button
on the display (the time bands are not displayed). Then set the room temperature value by pressing thebuttons
/ in 0.1°C increments. By keeping the button pressed the temperature will change rapidly. Manual
operation will be maintained until another operation mode is selected.
3.6 (Step 6) DHW - Heating temperature adjustment
Heating - Press the button
can be adjusted using the buttons
DHW - Press the button
using the buttons
The heating water flow temperature is calculated taking into account the following parameters and
variables: • measured room temperature • set Room temperature.
If the boiler has the external temperature probe, weather compensation is also taken into account.
EN
80
: the display shows the current heating circuit water temperature setting, which
/
: the display shows the current DHW temperature setting, which can be adjusted
/ in 1°C increments. Press any button to exit the menu.
code 3542A980 - Rev. 00 - 01/2022
blinking, will be canceled at the first time band change.
in 1°C increments. Press any button to exit the menu.
and the symbol will appear