König SAS-ALARM240 Manual De Usuario página 3

SAS-ALARM240
Alarm system
Description
Remote control (fig. A)
•
1. button
•
2. button
•
3. button
•
4. button
Control panel (front) (fig. B1)
If the control panel is protected with a password, first enter the
password.
5. Digit buttons
•
6. button
•
7. button
•
8. button
•
9. button
•
10. button
11. Time display
•
12. indicator
•
13. indicator
•
14. indicator
•
15. indicator
•
16. indicator
•
17. indicator
Control panel (top) (fig. B2)
18. Battery power switch
19. DC input (5V)
20. Siren
21. Telephone line
Extension line
Arming button
Disarming button
Partial-arming button
Emergency button
* button / Emergency button
# button / Setup button
Arming button
Disarming button
Query button
Arming indicator
Partial-arming indicator
Disarming indicator
Battery indicator
Scheduled arming/disarming indicator
Built-in siren indicator
3 3
Installation
• Install the alarm system at a central location, away from metal
objects or household appliances.
• Connect the telephone line, the extension line, the siren and
other cables.
• Power up the control panel.
• Set the battery power switch to the "ON" position.
Use
Arming
All detectors are activated. If an event occurs, the alarm system will
operate immediately.
• Remote control: Press the arming button.
• Control panel: Press the arming button.
The arming indicator appears on the display.
Partial arming
User-selected detectors are activated. If an event occurs, the alarm
system will operate immediately.
• Remote control: Press the partial-arming button.
• Control panel: Press the arming button twice.
The partial-arming indicator appears on the display.
Disarming
All detectors are deactivated. If an event occurs, the alarm system
will not operate.
• Remote control: Press the disarming button.
• Control panel: Press the disarming button.
The disarming indicator appears on the display.
Emergency alarm
The alarm system will operate immediately, whether armed or
disarmed.
• Remote control: Press the emergency button.
• Control panel: Press the emergency button.
Using the telephone
After receiving a call from the alarm system in case of an event, you
can also use the telephone to control the alarm panel remotely.
[1]: Arming
[3]: Monitoring on
[5]: Voice prompt on
[7]: Siren on
English
[2]: Disarming
[4]: Monitoring off
[6]: Voice prompt off
[8]: Siren off