Fein AMM700 1.7Q AS Instrucciones De Uso página 16

en
16
Handling the battery.
Store, operate and charge the battery only
using FEIN battery chargers within the oper-
ating-temperature range between 5°C –
45°C (41°F – 113°F). At the beginning of
the charging procedure, the battery temper-
ature must be within the battery operating-
temperature range.
Battery charge-control indicator
(figure 3).
The charge condition can be indicated by the
green LEDs of the charge-control indicator
on the battery. Press the charge-control
indicator button
charge condition.
LED indi- Meaning
cator
1 – 4 Percent-
green LED age of
charge
condition
Continu- Battery is
ous red almost
light empty
Red flash- Battery is
ing light not ready
for opera-
tion
The real percentage of the battery charge
condition is only indicated when the power
tool motor is stopped.
Mounting the depth stop (figure 4).
Mount the depth stop with the 2 screws to
the bottom side of the gear case.
or to indicate the
Activity
Operation
Charge battery
Bring the battery
into the battery
operating-temper-
ature range, then
charge
The electronics automatically switch off the
motor prior to the battery being deep dis-
charged.
When no LED lights up after pressing the
charge-control indicator button, the battery
is defective and must be replaced.
Fig. 3
80-100 %
60-80 %
40-60 %
20-40 %
5-20 %
0-5 %
Fig. 4
Depth stop
60-100 %
30-60 %
5-30 %
0-5 %
1.
2.
Screws