TQ HPR Range Extender V01 160 Wh Manual Del Usuario página 9

3.1.2 Fasten FIDLOCK® Force Connector to Range Extender
WARNING
Fire hazard due to damage to the Range Extender by using screws that are
too long
► Only use the screws provided by the bicycle manufacturer or the
ISO 4762 M4 x 16 A2 cylinder screws included in the scope of delivery to
fasten the FIDLOCK® Force Connector.
Using screws that are too long can damage the battery in the Range
Extender.
► Fasten the FIDLOCK® Force
Connector (Pos. 1 in Fig. 3) in the
threads (Pos. 3 in Fig. 3) in the
Range Extender using the four
M4 x 16 cylinder screws supplied
(Pos. 2 in Fig. 3).
► Tighten the four cylinder screws
with a torque of 1.0 Nm.
3.1.3 Insert and lock the
Range Extender on the
FIDLOCK® Bike Base
► Place the Range Extender (Pos. 1 in
Fig. 4) with the fastened FIDLOCK®
Force Connector (Pos. 2 in Fig. 4)
diagonally onto the FIDLOCK®
Bike Base (Pos. 3 in Fig. 4). The pin
(Pos. 4 in Fig. 4) on the FIDLOCK®
Bike Base must slide into the
corresponding socket in the
FIDLOCK® Force Connector when
it is put on. The magnets support
the attachment and the Range
Extender should automatically lock
into place with an audible click.
EN - 8
1
2
Fig. 3: Fasten FIDLOCK® Force
Connector to Range Extender
3
Fig. 4: Insert Range Extender
3
1
2
4