Descargar Imprimir esta página

LIMIT 1003 HV Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
Limit 1003 HV
Cross Laser with one horizontal line 360º and two vertical lines. The vertical
lines intersects on the roof. Self-leveling with magnetic pendulum damping.
The lines can be on separately or together. A mechanical locking of pendulum
mechanism acts as both the main switch and transport locking. The lines flash
and buzzer indicates that the slope is outside self-leveling range. Self- leveling
can be disconnected to show an inclined plane.
Safety.
Do not stare directly into the laser beam. It can cause serious eye
damage. Therefore, do not place instrument at eye level.
Care and handling.
accordingly. Avoid shock, drop and vibration. Turn off the main switch during
transport. Always store the laser dry. Remove the batteries if the instrument is
not used for a long time. Clean with a soft, dry cloth.
Content.
Laser instrument, batteries and instruction manual.
Technical Specification:
2pcs 15mW, 635nm laser diode for horizontal laser line.
2pcs 10mW, 635nm laser diode for vertical line.
Self-leveling range
Accuracy
Water/Dust protection
Batteries
Running time
Operating temperature
Thread for tripod
Dimension
Weight
On / Off.
The main switch has three positions.
Off and transport locking - On, without self- leveling - On, with self-
leveling.
Φ
Toggle the lines, Horizontal-Vertical-Horizontal-Vertical, and then cycle
(come back to one horizontal line).
Π.
Pulse signal. For use outdoors and in bright areas with a separate laser
This is a precision instrument and should be treated
± 4º
± 1.5 mm / 5 m
IP 54
3 pcs. Type AA
6 hours
-5 ... 45 ºC
¼ "
110x70x115 mm
500 grams
2
English

Publicidad

loading