Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVING & CLEANING EXHAUST FILTER
5. Install the cleaned or new filter. Then
insert the filter door tabs into the upper
slots and lock the filter door into place.
IMPORTANT! Clean or change all filters
regularly for best performance. ALWAYS
USE FILTERS FOR DRY VACUUMING. If
the machine is used without the filters, the
motor will burn out and the warranty will
be voided. Always keep spare filters on
hand.
Before storing your vacuum, the collection tank should be emptied and cleaned. The
accessories should be cleaned and stored so they can be readily available when needed.
Store the vacuum indoors.
1. Store the power cord in place by
rotating the cord rewind knob clockwise
as shown.
NOTE: To prevent the power cord from
getting stuck, do not retract the cord too
fast or in wrong direction.
2. Place the wands onto the accessory
storage.
NOTE: All of the filters included are made
of high-quality materials designed to stop
small dust particles. The vacuum and all
of the included filters should be used for
dry pick-up only. Dry filters are necessary
to pick up dust. If the filter is wet, it will
clog quickly and be very difficult to clean.
Handle all of the filters carefully when
removing it for cleaning and or replacing.
Check the filters for tears or small holes.
A small hole can let dust pass through and
out of the filter. Do not use a filter with
holes or tears; replace it immediately.
STORAGE
3. The floor nozzle has a storage hook that
slides into the slot on the back of the
collection tank.
- 13 -
Publicidad
