Publicidad
PROBLEM
CAUSE
◾
The charging time via
Using EGO Adapter ACA1000
the mower charging
for charging requires long
port is too long.
time.
◾
The battery cannot be
Firmware bug of the riding
fully charged via the
mower or the charger/battery
mower charging port.
failure.
◾
Improper cleaning, such as
The mower cannot be
water getting on the electric
started after cleaning.
components, LCD screen etc.
◾
It is easy for the
The mower deck is clogged
mower to be clogged.
with grass and debris.
◾
The mower easily
The tires of the rear wheels
loses traction when
are worn.
climbing up on the
◾
Large mowing slope.
slope.
When the mower is
◾
stopped on a slope
The brake components are
with the parking
excessively worn due to
brake pedal pressed,
improper operation of the
the mower can slide
mower.
downward the slope.
There is no water
◾
The wash-port quick coupler
coming from the wash
is not mounted into place on
port when performing
the wash port.
deck washing.
There is abnormal
◾
The sound comes from the
sound when manual
magnets inside the driving
pushing the mower
motor.
without starting.
SOLUTION
◾
Use EGO charger CHV1600E for charging the mower
directly.
◾
Unplug the charger and wait for more than several
minutes, then reconnect the plug to the power
supply. If it does not work, contact a qualified service
technician for repair.
◾
Follow the instructions in section "CLEANING THE
MOWER" to clean the mower correctly.
◾
If the mower caught in rain accidentally, leave it in
the air to dry or use compressed air to dry it.
◾
Clean the mower deck after each use, following the
section "Using Wash Port to Clean Mower Deck".
◾
Seek local service to replace the wheel tires.
◾
Mowing slope should be at required degree.
◾
Contact a qualified service technician for repair.
◾
Re-attach the wash-port quick coupler until you hear
a clear click after firmly pushing. If it does not work,
contact a qualified service technician for repair.
◾
It is normal and no action is needed.
ZERO TURN RIDE-ON MOWER — ZT5200E-L
EN
35
Publicidad
