Publicidad
Idiomas disponibles
Idiomas disponibles
Filter locking
Push A inward and then towards the top of
the unit
Coils
After a few days from the first start-up, check the
state of cleanliness of the heat exchangers: the pres-
ence of rubble, glass wool and dust can impair the
proper functioning.
• Blow with compressed air on the finned surface
• periodically discharge the air in the pipes by
means of the system air discharge device
• in winter, drain water from the heat exchangers, if
not used
• check that the siphon of the condensate drip tray
is always efficient
Regular maintenance
Perform the following operations every year:
• general cleaning of all the parts of the unit and es-
pecialiy of the condensate collection tray
• examination of the power input of the motor and
the condition of the connections
A
4
5
• examination of the state of the hydraulic connec-
tions
6
RECYCLING AND DISPOSAL
Product waste disposal: it has to be in conformity with
the current environmental protection legislation.
Waste disposal of electric and electrical devices
(RAEE), in accordance with the European Direc-
tive 2012/19/UE (WEEE).
(Referred to Lands that follow recycling systems)
According to the icon put on the product or in the
documentation, the products at the end of their use-
ful lifecycle must not be wasted in the way normal
solid urban waste does.
The bin icon with the strikethrough is put on all
the products to remind that the waste sorting is
compulsory.
EN
47
Publicidad
