Publicidad
Idiomas disponibles
Idiomas disponibles
5. Fan Assembly. (cont.)
wood ceiling
With the hanging bracket secured to the outlet
joist
box and able to support the fan, you are now
safety cable loop
ready to hang your fan. Grab the fan firmly with
two hands. Slide downrod through opening in
hanging bracket and let hanging ball rest on the
wood screw
hanging bracket. Turn the hanging ball slot until it
and washer
lines up with the hanging bracket tab.
safety cable
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in serious
injury or death.
hanging bracket tab
Tip: Seek the help of another person to hold the
hanging ball slot
stepladder in place and to lift the fan up to you
once you are set on the ladder.
Find a secure attachment point (wood ceiling joist
highly recommended) and secure safety cable. It
will be necessary to use a heavy duty wood screw,
motor housing
washer and lock washer (not supplied) with the
safety cable loop. If necessary, adjust the loop at
the end of the safety cable. The loop at the end of
the safety cable should just fit over the threads on
the wood screw. Test safety cable by pulling on
loose end of cable with pliers. If the safety cable
slips, the loop must be adjusted tighter. Extra cable
slack can be left in ceiling area.
page 6
Publicidad
