Publicidad
Idiomas disponibles
Idiomas disponibles
2. Hardness of the wood.As a general rule, in
hardwood, approximately 1/4"penetration into the
wood is sufficient...and for softwood, up to
approximately 3/8"should be sufficient. The staple
should be flush with the underlying surface, as
shown in (Fig 8a). However, if the staple used is not
flush with the underlying surface, as shown in (Fig
8b)– this means that too long a leg length has been
used.In that case, we recommend the next shorter
leg length for desired results.
6. CLEANING AND MAINTENANCE
The tool is virtually maintenance free. Keep tool clean
and free of dust. Wipe clean with a dry cloth; do not
use harsh chemicals to clean.
There are no parts inside the equipment which require
additional maintenance.
7. STORAGE
Store the equipment and accessories in a dark and
dry place at above freezing temperature. The ideal
storage temperature is between 41°F (5 ˚C) and 86°F
(30 ˚C). Store the electric tool in its original packaging.
8. DISPOSAL AND RECYCLING
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Never
place defective equipment in your household refuse.
The equipment should be taken to a suitable collection
center for proper disposal. If you do not know the
whereabouts of such a collection point, you should
ask in your local council offices.
This product has been marked with a symbol
relating to removing electric and electronic
waste. This means that this product shall not
be discarded with household waste but that
it shall be returned to a collection system. It will then
be recycled or dismantled in order to reduce the
impact on the environment. Electric and electronic
equipment can be hazardous for the environment and
for human health since they contain hazardous
substances.
8
Publicidad
