Parts Description - Makita XCV03 Manual De Instrucciones

Auto-suction stop during wet
suction operation
(for the cloth filter model)
WARNING:
Do not use for a long time while the
•
float is at work. Using the cleaner with
its float at work for a long time can
cause overheat, resulting in the cleaner
deformation.
Do not pick up foam or soapy liquid.
•
Picking up foam or soapy liquid can
cause foam to come out of air exit
before the float works. Continuing to
using in this condition may cause an
electric shock and breakage of the
cleaner.
Auto-suction stop works only when using
with the float and float cage.
The cleaner has a float mechanism that
prevents water from immersing into the
motor when picking up more than a certain
amount of water.
When the tank is full and the cleaner no
longer picks up water, switch off the cleaner
and empty the tank.
Locking or unlocking the caster
1
011611
To lock the caster with a stopper, lower the
stopper lever and the caster no longer will
rotate. To release the caster from the
locked position, raise the stopper lever.
Locking the caster is convenient when
storing the cleaner, stopping the work on
the way and keeping the cleaner still.
To operate the stopper, move it by hand.
NOTE:
When moving the cleaner, make sure
•
that the caster is unlocked. Moving the
cleaner with the caster in the locked
position may cause damage to the
caster.
1. Caster
2. Stopper lever
3. FREE position
4. LOCK position
3
4
2
Carriage handle
015545
When carrying the cleaner, carry it by
holding the handle on the head. The handle
is retractable at the head when not in use.
PARTS
DESCRIPTION
Model XCV03
(Cloth filter (for dry and wet dust) model)
1. Tank cover
2. Float
3. Float cage
4. Cloth filter
5. Tank
015616
8
1
2
3
4
5