OPERATION
Deactivate cooking zones
Deactivate cooking zone by doing one of the following:
•
Turn off the hob with the
•
Touch and hold the
•
Touch
to activate the cooking zone and slide to the left to reduce the heat
setting "0."
Turn off the appliance
The appliance operates when at least one cooking zone is on.
•
Turn off the hob with the
If a cooking zone is still hot, the relevant display will show the letter "H" or "h"
to indicate residual heat. For description of the symbol, see below.
Booster function "P"
Booster function increases the power of the 220x190mm cooking zone from 2200W
to 3700W, and Bridge cooking zone (220 x 390 mm) from 3600W to 5500W.
•
Place the cookware on the desired cooking zone.
•
The cookware will be automatically detected and the relevant display
show flashing "0."
•
Touch
to activate the Booster function — the display will show the letter "P".
Turn off the Booster function:
•
Touch the
tion.
Booster function can be activated for up to 10 minutes. After that time, the
cooking zone heat setting is set to the nominal power (for example, if the heat
setting range is 0-9, the nominal power is 9, if the range is 0-12, the nominal
power is 12, etc.).
This function can also switch back to the nominal power, if any hob components
overheat.
You can reactivate the Booster function when the internal components cool down
to safe range. This function will not start automatically.
When you take the pot off the cooking zone when the Booster function in on, a
10-minute countdown will not be interrupted.
sensor.
sensor for 3 seconds
sensor.
sensor and slide your finger to "0" to turn off the Booster func-
49
will