Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Stop'n go function (pause II)
Stop'n go function acts like a pause. The Stop'n go function simultaneously sus-
pends operation of all cooking zones and then resumes at the heat settings that
were previously set.
In order to activate the Stop'n go function, at least one cooking zone must be in
use.
Touch the
sensor. All cooking zone displays will show the
cooking zone is hot the
pending on cooking zone temperature (residual heat indicator).
To deactivate the Stop'n go function touch the
displays will show the heat setting that was previously set before activation of the
Stop'n go function.
Bridge function
The Bridge function allows pairing of two cooking zones into a single combined
cooking zone. The Bridge function is very convenient, especially when cooking in
large pots such as a baking pan.
The two left or two right cooking zones can be bridged.
To select the Bridge function:
•
Turn on the hob.
•
Place the baking pan on the left or right cooking zones.
•
The pan will be automatically detected and the Bridge function will activate as
indicated by the
If you do not select heat setting within 10 seconds the Bridge function will be
deactivated.
•
Select the desired heat setting by sliding your finger across the setting selec-
tion sensor field
Now both cooking zones can be controlled at the same time.
symbol will flash alternately with the letter "H" or "h", de-
symbol.
sensor field again. Cooking zone
55
symbol. When a
Publicidad
Capítulos
Tabla de contenido
