Cordivari Window 1100 Electric Manual De Uso página 26

English
activating the frost protection mode by pressing the mode key 3
times and then OK for 5 sec.
d) When the remote control and RF receiver are connected,
the symbol is steady on
e) To cancel the connection, press the memo key for more
than 10 seconds on the RF receiver
Table showing the connection status between remote control
and receiver
RF communication status
Stand-by
No RF connection
RF connection
RF connection cancellation
RF connection OK
RF message received
Table indicating the operating mode
RF communication status
Stand-by
Switching on
Heating on
Boost
Frost protection, open
window detection
Manual activation (MEMO button)
11. Using the Receiver without remote
control
By controlling the receiver alone, the towel warmer can be switched
on manually and temporarily. With a quick press of the button: Light
1 turns on. Then, with subsequent presses, light 1 will switch from
on (relay on) to off (relay off) in sequence. This manual command
will be cancelled on the next order received. If there is no remote
control paired, the surface limitation function is not active. The
duration of forced mode is 1 hour max. The appliance is designed
to be safe both during normal use and under abnormal conditions,
whatever the state and setting of the surface limitation function.
5 sec
LED status and colour
Off
Red
Flashing red
Quick flashing red
Green
Green - quick flashing for 1
sec.
LED status and colour
Off
Green
Red
Flashing red
Flashing green
Flashing orange
12.
Description of RF Receiver and
Remote Control
• Remote Control Buttons
• Description of display indicators
Modes of operation
Auto mode Comfort mode
Eco mode Frost protection mode
date and time setting mode
Programming mode
8
1
2
3
4
5
6
7
days of the week
(1=Monday...7= Sunday)
- 26 -
1) Battery compartment
2) Mode =>Selection
operating modes
3) + and - buttons used to set
temperatures, date, time and
weekly program
4) OK => Save settings
5) Boost button
6) Temperature selection knob
7) LCD display
(1) Current ambient
temperature / surface
temperature limitation
(2) Energy consumption
(3) Surface temperature
limitation/current ambient
temperature
(4) Boost light indicator
(5) Open window detection
Settings
occupation indicator
9
10
(6) Keypad locked
11
12
(7) Days of the week
13
(8) Operating modes
(9) Heating indicator
(10) Pilot wire indicator
(France only)
(11) Low battery indicator
(12) Radio transmission
indicator
(13) Min/max value
indicator
Code 1910000000356 - nv02
of the