Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
Thank you for choosing Deltaco!
1. Light sensor
2. Camera lens
3. Micro USB port
4. Infrared sensor
5. Microphone
6. LED
7. Doorbell button
8. MicroSD slot
9. On/off button
10.Reset button
11.Speaker
Mounting
Please decide on which installation you
prefer with batteries or USB cable.
1. Mount the back cover to the wall with
screws (included).
2A. Option 1: Connect the Micro USB cable.
2B. Option 2: Install the 18650 batteries
(included).
3. Install MicroSD card (not included).
4. Reset the doorbell (see reset)
5. Mount/hang the doorbell onto the back
cover.
LED
Red = the camera is just turning on or there
is something malfunctioning.
Flashing red = waiting for WiFi connection.
Flashing red fast = connecting to WiFi.
Flashing blue = connecting to internet.
Blue = connected.
Reset
Press and hold the reset button for about
5 seconds.
6
Install and use
1. Download and install the app "Deltaco
smart home" from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app "Deltaco smart home".
3. Create a new account or log in to your
existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm in
the app.
8. Confirm the Wi-Fi network and
password.
9. Enter the device name.
Cleaning and maintenance
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the
device does not operate correctly, replace
it with a new device.
Clean the outside of the device using a
soft cloth.
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.
Publicidad
