Operation and Adjustment
Plug in the main power and turn on the switch (1).
You will hear a signal tone and the Computer screen will light up.
CIRCUIT BREAKER:
There is an circuit breaker (2) located on the right side of the switch (1) (see above picture); in case of
short circuit or over-current, the circuit breaker button will pop up and the treadmill will power off.
Please unplug the power source and push down the button, and then plug in the power cord and turn
on the switch to restart your workout. If the button pops up again, please contact Impex.
IMPORTANT NOTICE:
SAFETY KEY:
The treadmill will only work if the safety key (104) is properly locked in the provided notch of the
console. Insert the safety key (104) and attach the clip onto the waist part of your clothes. If it is
necessary to turn off the motor immediately, just pull the safety key (104) out of the console.
9