Publicidad
Idiomas disponibles
Idiomas disponibles
SDR-129285
STRUCTURE ILLUSTRATION
1. Temperature control dial
2. Cool box
3. Drip tray
4. Shelf
5. Adjustable front foot
6. Pocket/bottle racks
7. Refrigerator compartment
Note: this combination of cool box, drip tray, shelf and racks results in the most efficient use of energy for this
refrigerating appliance.
INSTALLATION
Choose a dry and well-ventilated place where there is no corrosive air.
In order to improve efficiency of the cooling system and save energy, it is necessary to maintain good ventilation
around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around
the refrigerator.
Ventilation condition
Make sure the refrigerator is placed in an area with adequate ventilation and is not exposed to hot air. Do not
locate the refrigerator near a heat source such as cooker, and avoid it from direct sunlight, thus guaranteeing
the refrigeration effect while saving energy consumption. Do not locate the refrigerator in the damp place, so
as to prevent the refrigerator from rusting and leaking electricity.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 30mm of free space should
be spared at the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
Dimensions in mm
W
D
470
447
H
A
B
496
800
874
C (°)
E
130±5
50
- 7 -
F
100
EN
Publicidad
