PRIXTON VC400 Manual Del Usuario página 6

SET-UP : Place your turntable in a secure location where it will be protected from the
elements or possible falls.
POWER CONNECTION: Connect the power by 5V DC adaptar.
LIFT THE DUST COVER: Lift the dust cover and keep it open when in use.
TURN ON: Turn on the Power Switch, note that this also controls volume.
SPEED SELECTION: Select the speed between 33, 45 and 78 rpm through speed switch.
INSERT THE RECORD: Carefully remove the record from its case and place the record on the
turntable plate.
MOVE THE NEEDLE: Release the tone arm lock, slowly and gently move the needle over the
record, placing it on the outermost part of the record.
DROP THE NEEDLE: Once the needle is over the record, use the small lever on the base of the
needle and press down to lower it onto the record.
ENJOY YOUR MUSIC: Once above steps are completed, press the "Play mode" select key the
turntable will start turning automatically.
FINISHING UP: Lift up the tone arm and put it on the rest when finished, turn off the Power
Switch. (the turntable will stop automatically if the auto-stop switch is in the ON position. lf the
switch is in the OFF position then it will keep revolving until the tone arm is moved.)
CONNECTING TO AN EXTERNAL SOUND SYSTEM:
Connect an RCA audio cable (not supplied) to the AUDIO LINE OUT sockets on the rear of the
turntable. Connect the other end of the cable toan AUDIO INPUT on the amplifier. Red plug
into R channel output. White plug into L channel output.
USB/TF FUNCTION:
(lift up the tone arm and put it on the rest) lnsert your USB disk or TF card. Wait for few second,
USB or TF music will begin. Under this function, other functions will stop automatically.
USB/TF RECORDING:
lnsert the TF card or USB stick and hold down the "M" key until "REC" appears on the screen,
then press the "PLAY/PAUSE" key to start recording. To stop recording press the "M" button.
BLUETOOTH FUNCTION:
(lift up the tone arm and put it on the rest) Press "M" key to select Bluetooth mode. Make sure
the available Bluetooth device into "pairing mode". Choose and click the right Bluetooth name
to connect.
FM FUNCTION:
(Lift up the tone arm and put it on the rest) Press "M" key to select FM mode.
CLEAR RECORDER MUSIC:
When you want to clear the recorder music, press and hold the "PLAY/PAUSE" button till
display"DEL" and click the "PLAY/PAUSE" button once again to confirm, the currently playing
music will be removed.
AUX IN FUNCTION:
(Lift up the tone arm and put it on the rest) Insert Aux in cable (Please note other functions will
not work while cable is inserted).
6