•
Make sure that there is sufficient fuel in the fuel
tank.
•
Set the cutting height. Refer to
height on page 13 .
To fill fuel
WARNING:
flammable. Be careful and refuel
outdoors, refer to
10 .
WARNING:
exhaust system become very hot during
operation. Risk of burn injury. Let the
engine and the exhaust system become
cool before you fill fuel in the product.
WARNING:
tank as a support area.
CAUTION:
result in engine damage.
The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline.
•
Do a check of the fuel level before each use and
refuel if it is necessary.
•
Do not fill the fuel tank fully. Fill to the bottom of
the fuel tank neck.
To set the product in stand on or
walk behind position
•
Pull the latch to the right and fold down the stand
on platform to use the stand on option.
WARNING:
distance when the stand on platform
folds down.
12
To set the cutting
Gasoline is very
Fuel safety on page
The engine and the
Do not use the fuel
Incorrect type of fuel can
Keep a safe
•
Fold up the stand on platform to use the walk
behind option.
To adjust the adjustable bar
1. Turn the adjustment levers of the adjustable bar
(A) counterclockwise, until the adjustable bar can
rotate freely.
A
2. Put the adjustable bar (B) into correct work
position.
3. Turn the adjustment levers of the adjustable bar
(A) clockwise unti they are fully tightened.
To engage and disengage the
parking brake
•
Pull the parking brake lever rearward to engage
the parking brake. Refer to
page 4 for the location of the parking brake.
Note:
The product must be stationary when
you engage the parking brake.
•
Push the parking brake forward to disengage the
parking brake.
To disengage and engage the drive
system
CAUTION:
drive system when the product is parked
on level ground.
If it is necessary to move the product by hand, with
the engine off, the drive system must be disengaged.
A
Product overview on
Only disengage the
1996 - 003 - 07.12.2022