Descargar Imprimir esta página

VWR avantor OXY 11 Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
EN
English
For your safety
Cleaning agents
8
5
Maintenance, cleaning, replacement
5.1
General maintenance notes
Note the following safety instructions when handling electrolyte and cleaning
solutions:
CAUTION
The ELY/G electrolyte solution and RL-G cleaning solution irritate the eyes
and skin. Note the following points when dealing with these solutions:
 During working activities, always wear suitable protective gloves and
protective goggles/face shield.
 If it comes into contact with the skin, rinse thoroughly with water and
immediately change contaminated clothing.
 If it comes into contact with the eyes, rinse thoroughly with water and
consult a doctor.
 Note the safety datasheets.
CAUTION
Before all maintenance activities, disconnect the sensor from the
instrument.
Note
Information on how to order wear parts and maintenance equipment can be
found in chapter 8 W
EAR PARTS AND ACCESSORIES
5.2
Outside cleaning
Contamination
Lime sediments
Fat/oil
After cleaning, thoroughly rinse with deionized water and recalibrate if
necessary.
.
Cleaning procedure
Immerse in acetic acid for 1 minute (volume
share = 10 %)
Clean with warm water that contains
washing-up liquid
OXY 11
ba75842e04
05/2021

Publicidad

loading