B 528234001219112015
The grease filter is cleaned in the following way:
1
Open the cover by pulling down on the
edge of the cover at the front of the hood,
where the control panel is located.
•
Place the filter in warm soapy water and clean if necessary with a soft brush.
•
Rinse with warm water.
•
Leave the filter to dry on a dishcloth or similar.
•
Repeat the process if necessary.
•
Re-attach the filter.
The filter can also be washed in the dishwasher. Please note however, that machine washing can
result in discolouration of the filter. Discolouration of the filter does not affect performance.
REPLACING THE RECIRCULATION FILTER
If recirculation filter is used, it cannot be washed, but must be replaced when needed. Thermex
recommends the recirculation filter to be replaced at least 2–4 times per year.
THERMEX VALENCE 71
2
Remove the grease filter behind the cover
by pulling the filter-locking mechanism.