Iluminarc LOGIC Graze L Guía De Referencia Rápida página 3

DC Power
This product is powered by the LΩGIC Drive 2X with a CAT6 connection of 52-56 VDC. Download the User Manual for
the LΩGIC Drive 2X from
Power Linking
It is possible to link up to 2 LΩGIC Graze L products from one output of the LΩGIC Drive 2X.
Signal Linking
The LΩGIC Graze L will receive a control signal (DMX, RDM, Art-Net™, or sACN) from the LΩGIC Drive 2X via a CAT6
connection.
Connecting and Cabling
The LΩGIC Graze L has an IN port and an OUT port which require a CAT6/A Ethernet connection.
LΩGIC Drive 2X
Cable requirements: ≥23 AWG (≥0.5733 mm) solid copper wire shielded CAT6/A, terminated with RJ45 connectors.
• Stranded conductors not supported
• Total Max Cable Length (LΩGIC Drive 2X to first fixture): ≤100 m / 328 ft
• Total Max Cable Length (LΩGIC Drive 2X to last fixture): ≤140 m / 460 ft
• Total Max Cable Length (first fixture to last fixture): ≤40 m / 131 ft
Patch Cable Guide
LΩGIC Graze L products mounted end-to-end can be connected by a CAT6 patch cable as short as 4.656 in (118.27 mm)
from plug to plug, give or take a quarter inch (6.35 mm).
(Ethernet port depth)
Cable length tolerances between manufacturers vary. Always verify that cables are a suitable length
before installing.
LΩGIC Graze L QRG Rev. 5
QUICK REFERENCE GUIDE
www.iluminarc.com for more details.
2.203 in
55.96 mm
0.494 in
12.56 mm
LΩGIC Graze L
IN
3.417 in
86.8 mm
4.406 in
111.92 mm
4.656 in
118.27 mm
OUT
IN
Measure cables from
plug to plug, as shown
EN
2