Publicidad
Idiomas disponibles
Idiomas disponibles
EDID Management
The splitter features automatic EDID without DIP switch for EDID
management, and enables the source to output the most-suitable timing
to all displays by analyzing and mixing their different EDID information.
For example, when Output 1 connects to a display with 4K@30Hz,
LPCM 5.1CH as default EDID, Output 2 connects to a display with
1080p@60Hz, LPCM 2CH, and Output 3 connects to a display with
720p@60Hz, LPCM 5.1, then the source will output 720p@60Hz, LPCM
2CH to all displays.
Troubleshooting
Most problems that occur are due to simple issues. If you have trouble,
please check the list of simple fixes below.
PROBLEM
POWER LED OFF
NO PICTURE
For more information please call 1-833-574-9124 or email AVARRO@adiglobal.com
SPLITTER TROUBLESHOOTING
Ensure that the splitter is powered on.
Check that the cables are qualified and
connected properly.
Verify that all the devices are powered on, and
that all the cables are qualified and connected
properly.
Verify that the display devices work properly and
that the source device has normal signals output.
Check the length of HDMI cable. The maximum
length is 10 meters.
SOLUTION
6
···
To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Publicidad
