Publicidad
SETTING THE AUTO-ON TIME
When you turn the Function knob to AUTO
ON, the previously selected Auto-On time,
or the default time (12:00) will flash.
1. Turn the Function knob to AUTO ON.
AUTO ON indicator will flash to begin
programming. Use the Hour and Minute
buttons as above to program your
start-brew time.
2. Press the ON/OFF button to activate
the program.
When you press ON/OFF, the AUTO ON
indicator will illuminate, indicating the AUTO
ON function has been activated. Clock
Display will show the current time.
3. AUTO ON brew cycle begins.
The BREW indicator will flash slowly when
the brew cycle begins at the time you have
selected. When the brew cycle ends,
WARM will illuminate indicating Keep Warm
cycle. Lights will turn off when the Keep
Warm cycle ends and BREW will come
back on indicating the coffeemaker is ready
for the next brew.
NOTE: To start brew time at the same
time the next day, simply make sure the
Function knob is at AUTO ON and press
and release ON/OFF button once more.
The AUTO ON indicator will turn on.
SETTING THE AUTO-OFF TIME
Turn the Function knob to AUTO OFF
Use the Hour and Minute buttons as above
to program your Coffeemaker to shut off from
0 to 4 hours after brew cycle is finished.
BREWING COFFEE
Follow instructions in Setting Up Your
12-Cup Coffeemaker on page 9.
1. Insert charcoal water filter
Follow directions for the preparation and
insertion of the filter on page 9.
2. Fill the water reservoir
Open the Coffeemaker reservoir cover by
lifting it up. Pour in the desired amount of
water, using the water level indicator
located at the side of the Coffeemaker.
3. Before brewing
Make sure the glass carafe is in position on
the heater plate and the top cover is closed.
Plug the cord into an electrical outlet.
4. Set preferences
Push the BOLD button if you would like
a stronger brew. BOLD indicator will
illuminate.
5. Add the ground coffee
Remove the filter basket by grasping the
handle and lifting straight up. Insert a #4
paper filter or permanent filter. Be sure that
a paper filter is completely open and fully
inserted in the basket. It may help to fold
and flatten the seams of a paper filter
beforehand. Add 1 level scoop of ground
coffee per cup. Adjust the amount
according to taste.
NOTE: The maximum capacity for
ground coffee is 15 tablespoons for this
Coffeemaker. Exceeding this amount
may cause overflow if the coffee is too
finely ground.
Replace the filter basket in the filter basket
holder and press firmly on cover to be sure
it closes securely.
6. Brewing coffee
Turn the Function knob to BREW, press the
ON/OFF button, and the BREW indicator
light will flash slowly. Or, set the AUTO ON
function (this page) and the AUTO ON
indicator will be illuminated.
7. After brewing
When the brewing cycle has been
completed, coffee will continue to stream
from the filter for several seconds. When
streaming completely stops, five beeps will
sound and you can now enjoy your coffee.
NOTE: Reservoir cover may be hot
during and directly after brewing.
Wait at least 10 minutes before opening.
BREW PAUSE™ FEATURE
This feature interrupts the flow of
coffee from the basket to let you
pour that first cup mid-brew.
Because the flavor profile of coffee
brewed at the start of a cycle differs
from that brewed toward the end,
be aware that using this feature will
weaken the flavor strength of the
finished pot.
NOTE: Removing carafe for more
than 20 seconds may cause filter
basket to overflow.
10
Publicidad
