Cameo X3 TW Manual Del Usuario página 20

INSTALLATION
DANGER : Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
Mount a suitable truss clamp directly on the U-bracket (fig. A). An optionally available
Omega bracket can also be attached to the U-bracket (Fig. B). Installation on a truss is possible
with a truss clamp. Suitable truss clamps are optionally available.
Loosen the two clamping levers on the sides of the headlamp (fig. C) to adjust the beam direction
on a vertical plane and tighten the two clamping levers again after adjustment.
Always ensure firm connections and secure the headlamp with a suitable safety rope, depending
on the situation, to the safety eyelet on the top or bottom of the headlamp (Fig. D).
20
B
A
D
C
D
C