Descargar Imprimir esta página

POWER SMITH PWLRD024UH Manual Del Operario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS
Store work light in a secure place out of the reach of
children. Inspect it for good working condition prior to
storage and before re-use.
WARnInG:
a Lithium-ion battery. Lithium-ion batteries are small,
compact, and ideal for providing long-lasting power to
this product. However, they must be used and charged
properly. Improper use can result in serious injury, fire,
or death.
cAUtIon:
This product comes with a battery
installed internally. Do not attempt to remove the battery
from the product.
Do not place this lithium-ion battery-powered product in
fire or apply heat to it.
Do not apply strong impact or shocks to this lithium-ion
battery-powered product.
Do not allow the lithium-ion battery to get wet.
Do not leave this lithium-ion battery-powered product in
the direct sunlight, or use or store it inside cars in hot
weather. Doing so may cause the battery to generate
heat, rupture, or ignite. Using the battery in this manner
may also result in a loss of performance and a shortened
battery life.
NEVER THROW WATER ON A BURNING LITHIUM-ION
BATTERY! If a lithium-ion battery does catch on fire, it
will burn even more violently when contacted with water.
Store the product at temperatures between 41°F and
77°F (5°C and 25°C).
Properly dispose of all batteries at a recycling center
or per local code. More information regarding battery
disposal in U.S. and Canada is available at; http://www.
rbrc.org/index.html, or by calling 1-800-822-8837
(1-800-8BATTER).
OPERATION
This product comes with one foldable & expandable hood
bracket (1) and two rechargeable LED lights (9).
USING HOOD BRACKET
The hood bracket is packed in a folded/storage position.
See FIG1-B. Before use, unfold it to a straight position. The
spring-loaded hooks (2) on both ends expand the length of
the bracket from 51" to 75" to fit most vehicles.
The included lights can be attached to the bracket by
clipping the light bases on the bracket as shown in FIG 1-A.
CHARGING THE LIGHTS
The two rechargeable lights can be charged at the same
time by using included dual USB-C charging cable.
1. Make sure the lights are turned off.
2. Lift the clear cover (5) on each light to access the
charging port (8).
3. Connect the USB end of the charging cable to a standard
5V USB power output.
4. The charging cable has two USB-C ends to charge both
lights at the same time. Connect each to the charging
ports on the two lights respectively.
NOTE: If only one light needs to be charged, just leave
one USB-C end unconnected.
This LED light is powered by
English
5. The battery power Indicator lights (6) on each light will
illuminate green to display the battery power level. One
of the indicator lights will be flashing if charging is in
progress.
6. When charging is complete, all four indicator lights will
be solid green.
NOTE: Each light can operate at up to 500 lumens while
charging. If the battery is completely discharged, charge for
at least 10 minutes prior to using this feature. If using both
lights while simultaneously charging them, a 5V/2A USB
Input power is required to preserve battery life.
SwITCH BUTTON
Each light can operate independently. Press the switch
button (4) once to turn the light on at the high setting. Press
the switch the second time to set the light at a low setting.
A third press will turn the light off.
BATTERY POwER INDICATOR
Each light has a battery power indicator (6). It consists of
four green lights. To indicate the battery power level, power
the light on. More illuminated lights indicate more battery
power remaining.
USB POwER OUTPUT
Each light has a USB power output (7) to charge other
portable devices using an appropriate USB cable.
MAGNETIC BASE
Each light features a magnetic base (10) for independent
use in a variety of applications. The base is designed to clip
on the included hood bracket. It can slide and rotate 360°
on the bracket to direct light to where it is needed.
WARnInG:
unplugged and completely cool before attempting to
clean it.
Your light requires very little care and maintenance. Simply
clean the lens regularly with a non-abrasive cleaner.
This product is warranted free from defects in material
and workmanship for 2 (tWo) years after date of purchase.
This limited warranty does not cover normal wear and tear
or damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior
to returning your product to store location of purchase,
please call the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith™
product,
Please call Toll-Free:
Or visit our website:
www.
powersmithproducts.com
3
OPERATION
MAINTENANCE
Always make sure the light is
WARRANTY
HELP LINE
888-552-8665.

Publicidad

loading