5. When done using the appliance, turn all temperature dials OFF, turn off the
appliance with the power On/Off switch (A), unplug the power cord from the
mains, and clean the appliance thoroughly after it cools down.
3.4. Cleaning and maintenance
a)
Before cleaning and when the appliance is not in use, unplug it from the mains.
b)
Use non-corrosive agents for cleaning the surfaces only.
c)
Only mild cleaning agents intended for surfaces in contact with food shall be
used to clean the appliance.
d)
After each cleaning, dry all components well before the appliance is used
again.
e)
Do not spray the appliance with a stream of water and do not immerse it in
water.
f)
Ensure that water will not enter through the ventilation ports in the housing.
g)
Clean the ventilation ports with a brush and compressed air.
h)
Regularly inspect the appliance for technical defects and damage.
i)
Use a soft, damp cloth for cleaning.
j)
Do not clean with any sharp and/or metal implements (e.g. a wire brush or a
metal scraper) as these may damage the surface of the appliance.
k)
Do not clean the appliance with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.
Assembly drawings:
MODEL: RC-HTR5WC/RC-HTR5WOC