5
5
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Glue the Wood Dowels (5) into the end holes on the Cabinet Top Panel (B), Cabinet Bottom Panel (C)
and Modesty Panels (H and I) as shown. It is important to use a small amount of glue on both ends of
dowels and wipe away excess glue with a damp cloth immediately.
3. Place the Desk Top (A) upside down on a level and protected surface near the final position you prefer to
place the furniture.
4. Align and attach the Right Side Frame (F) to the Desk Top (A) using four 32mm Bolts (2) with four Lock
Washers (3) and four Flat Washers (4).
Assembly Instructions
H
I
F
F
5
B
5
4 3
2
A
A
7
C