Publicidad
FM10_DE_RU_80S_977091-02_final.qxp_Innenseiten_FM10.qxd 25.02.19 11:00 Seite 1
Important safety instructions
GB
These operating instructions familiarise
you with important safety instructions
and information required to operate the
device properly!
N
Please read the instructions carefully,
keep them in a safe place and pass them
on to the next owner with the device,
if necessary!
All safety instructions serve for your per-
sonal protection as well!
l
This device is in compliance with the gener-
ally accepted technical rules and the relevant
safety regulations.
l
This device may be used by young people
from 16 years and above and by persons with
diminished phys ical, sensorial or mental ca-
pacities or lack of experience and know ledge
if supervised or if they have been instructed
with respect to safe use of the device and un-
derstand the risks that result from using it.
Children must not play with the device.
Cleaning and user maintenance must not be
performed by children without supervision.
l
Use device as intended!
l
Check the functioning of the spray unit each
time before startup, paying special attention
to the hose connection and the screw con-
nectors. Check material for cracks, brittleness
and corrosion.
l
Do not expose the filled tank to strong sun-
shine for any long period of time.
Operating temperatures must not exceed
+ 40 °C. Protect unit against frost.
l
Clean tank thoroughly immediately after
use and then dry completely.
l
Spraying agents that are environmen-
tally harmful should be use up as far as
possible on the object of the spraying,
any unavoidable residues should be put
in a suitable holding container and sent
for special disposal.
Observe all laws and regulations con-
cerning materials hazardous to waters
when temporarily storing and dispos-
ing of such materials.
l
Keep away spraying devices and agents
from children, animals and waters.
l
Do not try to clear blocked nozzles by blow-
ing them out with your mouth.
l
The unit is not intended to store liquids, it
must be emptied out after each time it has
been used and washed out thoroughly.
l
Always check the the safety / pressure
relief valve (A) when pumping up the unit
and do not exceed the maximum permissi-
ble pressure of 3 bar.
l
All parts that are under pressure or conduct
the liquid or operating parts and the the
safety / pressure relief valve must be checked
regularly to ensure that they are in perfect
condition and function properly. Stop using
the unit at once if any damage is suspected.
l
Do not allow it to remain pressurised for an
extended period.
l
As a precautionary measure, we recommend
that the pump spray unit be subjected to a
particularly thorough inspection every two
years, preferably by the manufacturer.
Repairs to the tank are not permitted.
l
Observe the accident prevention regula-
tion "DGUV Regeln 100-500; Betreiben
von Arbeitsmitteln [DG-UV Rule
100-500; op-erating work equipment]".
l
Repairs to the equipment should only
be carried out by
tions. Order spare parts from your au-
thorised dealer. If the required parts
are not in stock, he will procure them
for you as quickly as possible.
10
Wetrok
Service Sta-
Publicidad
