Publicidad
Idiomas disponibles
Idiomas disponibles
•
Regularly check for worn or damaged components and
have them repaired/replaced when necessary
•
Sharpening the cutting blades
! remove battery from tool
- sharpen the cutting blades with a small and smooth file,
in case a solid object damaged them
- we advise you, however, to have the blades sharpened
by a specialist
- lubricate the cutting blades after sharpening
•
Storage
- use blade cover H when storing the tool
- before storing the tool, wipe off the cutting blades with
an oil-soaked rag to prevent corrosion
•
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
•
Be aware that damage due to overload or improper
handling of the product will be excluded from the
warranty (for the SKIL warranty conditions see
www.skil.com or ask your dealer)
TROUBLESHOOTING
•
The following listing shows problem symptoms, possible
causes and corrective actions (if these do not identify
and correct the problem, contact your dealer or service
station)
! in case of electrical or mechanical malfunction,
immediately switch off the tool and remove battery
Motor does not start or stops suddenly
- empty battery -> charge battery
- hot battery -> let battery cool down
- cutting blades jammed -> clear jammed material
- internal fault -> contact dealer/service station
Tool operates intermittently
- on/off switch defective -> contact dealer/service station
- internal wiring defective -> contact dealer/service
station
- impeller blocked by foreign object -> remove blockage
Motor runs but blades remain stationary
- internal fault -> contact dealer/service station
Cutting blades hot
- cutting blades blunt -> have blades sharpened
- cutting blades have dents -> have blades inspected
- too much friction due to lack of lubricant -> lubricate
blades
ENVIRONMENT
Only for EU countries
•
Do not dispose of electric tools, accessories and
packaging together with household waste material
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 9 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
Only for UK
Do not dispose of electric tools, accessories and
•
packaging together with household waste material
- in observance of on Waste Electric and Electronic
Equipment Regulations 2013 (SI 2013/3113), electric
tools that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility
- symbol 9 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
NOISE / VIBRATION
•
Measured in accordance with EN 62841 the sound
pressure level of this tool is 82 dB(A) (uncertainty
K = 3 dB) and the sound power level 89 dB(A)
(uncertainty K = 4.1 dB), and the vibration < 2.5 m/s²
(triax vector sum; uncertainty K = 1.5 m/s²)
•
The vibration emission level has been measured in
accordance with a standardised test given in EN 62841;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
b
Taille-haie sans fil
INTRODUCTION
•
Cet outil a été conçu pour tailler les haies et les buissons
et il est destiné à un usage domestique uniquement
•
Cet outil n'est pas conçu pour un usage
professionnel.
•
Lisez attentivement ce mode d'emploi avant
d'utiliser l'outil et conservez-le pour pouvoir vous y
référer ultérieurement
•
Prêtez particulièrement attention aux consignes de
sécurité et aux avertissements ; sinon, vous risquez de
subir des blessures graves
•
Vérifiez que toutes les pièces montrées sur le schéma
sont contenues dans l'emballage
•
Lorsque des pièces manquent ou sont endommagées,
contactez votre revendeur
CARACTÉRISTIQUES TECHNIQUES 1
PIÈCES DE L'OUTIL 2
A
Poignée arrière
B
Bouton de blocage
13
0480
Publicidad
