• Operation – Do not force the log into the splitting wedge;
allow the log splitter to do the work and only split one log
at a time.
• Loading – When loading a log, place your hands on the
sides of the log, not on the ends. Never place your hands
or any part of your body between the log and any part of
the log splitter. When the log pusher is moving, do not
attempt to load or secure a log with your hands.
• Jam – If a log becomes jammed, release the power button
and control lever. Wait until the log pusher has stopped
moving before clearing jammed material.
High-Pressure Hydraulics
High fluid pressures are developed in hydraulic log splitters.
Pressurized hydraulic fluid escaping through a pin hole
opening can puncture skin and cause severe blood poisoning.
Heed the following instructions at all times.
• Do not operate a log splitter with frayed, kinked, cracked
or damaged hoses, fittings, or tubing.
• Remove the batteries and relieve the hydraulic pressure
before changing or adjusting fittings, hoses, tubing, or
other system components.
• Do not adjust the pressure settings of the pump or valve.
• Do not check for leaks with your hand. Leaks can be
located by passing cardboard or wood over the suspected
area and looking for discoloration. If injured by discharged
hydraulic fluid, see a doctor immediately. A serious
infection or reaction may develop without proper medical
treatment.
Work Area Safety
• Work area – Always inspect the area where the machine
is to be used and operate it in a well-lit environment. Keep
the work area clear of debris for safe, secure footing.
Make sure the log splitter is on a flat, level surface. Chock
the wheels to prevent unintended movement.
• Avoid dangerous environments – Do not operate the
machine in gaseous or explosive environments or use it
near flammable or combustible materials.
• Keep children, bystanders, and pets away –
All bystanders, including pets, should be kept at least 16.5
ft (5 m) from the log splitter while it is in operation.
Maintenance + Storage
m
WARNING!
Do not use detergents, acids, alkaline
solutions, bleaches or solvents such as acetone to clean your
log splitter. These substances may damage the plastic parts of
the machine.
• Inspect before use – Visually inspect for any loose
fasteners or worn, missing or damaged parts. Make sure
all nuts and bolts are tight to assure the equipment is in
safe working condition.
• Replacement parts – When servicing, use only identical
replacement parts. Replace or repair damaged parts
immediately. Contact the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
• Store indoors – When not in use, the machine should be
stored indoors in a dry place inaccessible by children.
• Manual – Refer to the manual for important details if the
machine is to be stored for an extended period of time.
Battery & Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to assemble the best
possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery packs can cause cell damage.
IMPORTANT! Analyses confirm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for product damage and/or personal injury.
m
WARNING!
Use only approved replacement batteries;
other batteries may damage the machine and cause it to
malfunction, which can lead to serious personal injury.
m
WARNING!
Do not use a battery pack or machine that
is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk
of injury.
Have your battery packs serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the battery packs is maintained.
m
CAUTION!
To reduce the risk of injury, use only official
24V iON+ designated chargers with the 24V iON+ battery
packs. The use of other batteries or chargers poses a risk of
fire, personal injury and damage. Do not modify or attempt to
repair the machine or the battery packs except as indicated in
the instructions for use and care. Do not wire a battery pack
to a power supply or car cigarette lighter, as such misuse will
permanently disable or damage the battery packs.
m
WARNING!
To reduce the risk of electric shock,
always unplug the charger before performing any cleaning
or maintenance. Do not allow water to flow into the charger.
Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock
hazards.
2
+ Sun Joe
customer
®
®