SNOWJOE sunjoe 24V-X2-LS6T Manual Del Operador página 8

2. Remove the battery once fully charged.
NOTE: A fully discharged battery at room temperature will
fully charge in 1 hr 50 mins.
IMPORTANT! Never allow a battery pack to become fully
discharged, as this will cause irreversible damage to the
battery.
Assembly
m
WARNING!
Accidental starting may result in serious
personal injury; always remove the battery packs from the tool
before assembly.
1. Install the handle onto the front stand using the included
set of socket head screws, washers and lock nuts (Fig. 2).
Lock
nut
Washer
Fig. 2
Handle
Socket
head
screw
8
2. Screw the grip into the control lever at the back of the log
splitter (Fig. 3).
Fig. 3
Operation
1. Before using the log splitter, loosen the bleed screw three
or four turns counter-clockwise to allow air to bleed out of
the hydraulic system (Fig. 4).
NOTE: To avoid hydraulic oil leaking, tighten the bleed
screw before transporting the machine.
2. Slide both batteries into the battery compartment (Fig. 5).
Battery
Fig. 5
Grip
Bleed screw
Fig. 4