probst RF-H Instrucciones De Uso página 19

General
1 General
1.1 Authorized use
The device (RF-H) is used only for manually removing the lean concrete bed (for gutter stones) /concrete subgrade
(between kerbstone and road asphalt pavement).
In order to lay gutter stones in the lean concrete bed in the following work step.
The device (RF-H) is used for standard kerbstones and can be pushed by one operator and, if necessary, additionally pulled
by a second operator (via the integrated shovel attachment).
•
The device is only designed for the use specified in this documentation.
•
Every other use is not authorized and is forbidden!
•
All relevant safety regulations, corresponding legal regulations, especially regulations of the declaration
of conformity, and additional local health and safety regulations must be observed.
Prior to every operation the user must ensure that:
•
The equipment is suited to the intended operation
•
the functioning and the working condition of the equipment is examined
•
the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
NOT ALLOWED ACTIVITIES:
Unauthorized alterations of the device and the use of any self-made additional equipment could cause
danger and are therefore forbidden!
Never exceed the carrying capacity/working load limit (WLL) and the nominal width/nominal size of the
device.
All unauthorized transportations with the device are not allowed:
•
Transportation of people and animals.
•
Transportation of other loads and materials than described in this manual.
•
Never suspend any goods with ropes, chains or similar at the device.
51000064 3 / 11 GB