Descargar Imprimir esta página

Leister 500-LP Instrucciones De Funcionamiento página 39

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7.6 Charger and battery
Observe the general power tool safety warnings – Battery tool use and care in Chapter 1 [4].
The GROOVER 500-LP is intended for use only with the LP 18.0V/5.0Ah battery and the LPC 18.0V
charger.
Do not expose the charger to rain or wet conditions. Water entering a charger will increase the risk
of electric shock.
The unit is only suitable for indoor use (inside rooms).
Read the operating instructions
(specific information can be found in the associated manuals for the charger and battery)
4
3
2
7.7 How to ensure a long battery life and store batteries correctly
ATTENTION
• Never charge batteries at temperatures below 5°C or above 40°C.
• Do not charge batteries in environments with high levels of humidity or high ambient temperatures.
• Do not cover the batteries or charger during the charging operation.
• Unplug the charger from the power outlet once charging has commenced.
• The battery should only be stored in a dry and dust-free area (max. 40°C). If batteries are not going
to be used for some time, they should be stored somewhere cool in a partially charged state.
The battery and charger heat up during charging. This is normal. Li-ion batteries do not suffer from the memory
effect. Nevertheless, a battery should be completely discharged before charging and the charging process should
always be fully completed.
1. Battery slot
2. Contacts
3. Ventilation slots
4. Display for indicating operating status
5
5. Power cord plus power plug
1
The LPC 18.0 V charger is intended for charging
lithium-ion batteries of the following type: LP 18.0 V
(5.0 Ah).
39

Publicidad

loading