nedis ZBLC10E14 Guia De Inicio Rapido página 9

6. Check if the bulb is blinking. If so, tap to confirm.
7. If the bulb does not blink, turn the lamp off and on 3 times and check again
previous step.
8. Tap to confirm the bulb A
9. The bulb appears in the app when the product is successfully connected to
the gateway.
10. Rename the bulb after it has been found and added.
Using the product
The product can be controlled from any distance using the Zigbee Gateway via
the Nedis SmartLife app while connected to the same network.
The home menu of the Nedis SmartLife app (image B) shows a control tile for
each connected lamp and/or group.
The product can be connected to Google Home or Amazon Alexa to enable
4
speech control.
The product can be connected to IFTTT to enable external conditions to
4
trigger the lamp.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product ZBLC10E14 | ZBLC10E27
| ZBLC10GU10 from our brand Nedis®, produced in China, has been tested
according to all relevant CE standards and regulations and that all tests have
been passed successfully. This includes, but is not limited to the RED 2014/53/
EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable)
can be found and downloaded via:
nedis.com/zblc10e14#support
nedis.com/zblc10e27#support
nedis.com/zblc10gu10#support
1 is blinking.
9