Publicidad
Carefully remove all contents from the plastic bag and gift box.
CAUTION : THIS FAN MUST OPERATE STANDING UPRIGHT.
DO NOT USE WITHOUT BASE.
ASSEMBLY INSTRUCTIONS
1. Removing the Hand Screw
Carefully turn the fan on its side and
place on a table. Ensure the back of
the fan body faces upward. Loosen and
remove the hand screw (A) from the
front base (B) by turning
counterclockwise.
2. Base Assembly
Align the two portions of the circular
base and snap together by gently
pushing the two pillars at the bottom of
the rear base (C) into the two adjacent
sockets of the front base (B). Ensure
the connections are tight and secure.
3. Securing the Tower Fan to the
Base Assembly
Place the power cord (D) through the
center of the base assembly.
3
D
Publicidad
