Probuilder 43627 Manual De Instrucciones página 31

Special safety directions
This multi-sander is intended for use on
wood, metal, plastic and similar materials.
The multi-sander is not intended for wet
sanding.
Always use sandpaper suitable for the size of
the sanding pad and the nature of the job.
Ensure item is secured before sanding.
Never use the multi-sander to sand materials
containing asbestos or gypsum!
Sparks can be generated when sanding
metal surfaces. Avoid using in � ammable
surroundings and in vicinity of � ammable
materials and � uids.
Keep the cord well clear of the working area.
Fitting sandpaper
Select a sandpaper with the appropriate
grain size for the task.
Use sandpaper with a low grit number for
coarse sanding and sandpaper with a high
grit number for � ner sanding.
Place the sandpaper (6) so that its holes are
in line with the holes on the sanding pad (5).
Press the sandpaper against the sanding
pad's hook-and-loop surface, and make sure
that it is � rmly in place.
Use
Place the dust collector (3) into the dust
extractor spigot (4) so that the tabs on the
dust collector � t into to the tracks in the dust
extraction spigot. Turn the dust collector
slightly clockwise so that it locks in place.
4
Keep � ngers clear of sanding pad and
connect sander to mains electricity. Hold the
multi-sander with both hands on the handle,
and turn it on by pressing the on/off button
(2) to the ON position.
3
31
GB