Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the water line to the water supply
(Unit with icemaker)
• Connect the water line to a water supply valve. If
a valve is not present or you are not sure, consult a
qualified plumber.
Connecting the water hose to the
refrigerator (Units with icemaker)
1. Slip the union (B) onto the water hose (A)
2. Push the water hose downwards firmly to slip it onto the
water inlet valve (C).
3. Tighten the union (C) by hand to secure it onto the water
inlet valve. Normally, you are not required to tighten the
union with a tool. However, you can use a wrench or pliers
to tighten the union if there is a leakage.
Changing the illumination lamp
To change the Bulb/LED used for the illumination of your
refrigerator, call your Authorized Service. The lamp(s) used in this
appliance is not suitable for household room illumination. The
intended purpose of this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a safe and comfortable
way. The lamps used in this appliance have to withstand
extreme physical conditions such as temperatures below -4 °F.
(only chest and upright freezer)
Electrical Connection
WARNING: Do connect to power
grid using an extension cord or
multi-plug adapters.
WARNING:
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be installed
side by side there should be at
1.5 inches distance between
them.
• Our company shall not be liable for any damages that will
arise when the product is used without proper
grounding and electrical connections in accordance
with the national and local regulations.
• Power cable plug must be within easy reach after installation.
• Do not connect your unit to the wall outlet using an
extension cord or a cordless multioutlet.
5
Damaged power
Publicidad
