Style selections LWSODS Instrucciones De Montaje página 4

ASSEMBLY INSTRUCTIONS
4. Attach drawer front (L) to drawer left (I), drawer right (J)
using small cam locks (LL).
Plug Plastic Covers (II) to cover the small cam locks for
nice looking.
Repeat previous steps to attach other three drawers.
Hardware Used
LL Small Cam Lock
Plastic Cover
II
5. Install cam bolts (BB) and wood dowels (CC) into
pre-drilled holes on side panel left (B) & side panel right
(C) and make sure they are completely seated, attach
back stretcher (E) & front stretchers (F) to side panel left
(B) and side panel right (C) by cam locks (AA)as shown
in figure.
Hardware Used
AA Cam Lock
BB
Cam Bolt
CC Wood Dowel
6. Insert the cam bolts (BB) and wood dowels (CC) into
pre-drilled holes on top panel (A), Position the Top Panel
(A) onto the side panel left (B) and side panel right (C) by
cam locks (AA)as shown in figure.
Hardware Used
AA
Cam Lock
BB
Cam Bolt
CC Wood Dowel
4
J
LL
II
I
x 16
x 16
L
5
E
F
C
x 4
CC
x 4
BB
x 4
6
BB
CC
A
B
x 4
x 4
C
x 4
7
ASSEMBLY INSTRUCTIONS
7. Insert wood dowels (CC) into bottom panel (G).
Attach bottom panel (G) to side panel left (B) & side panel
right (C) securing with M4 x 50 mm screws (DD).
Hardware Used
CC Wood Dowel
M4 x 50 mm
DD
Screw
x 4
8. Expand the back panel (D) and lay it onto the back
edges of assembled frame making sure the margins along
all edges are equal. Attach the back panel in place by us-
B
ing M3.5 x 15 mm screws (FF) through the pre-drilled holes
of back panel.
Hardware Used
FF M3.5 x 15 mm Screw
AA
9. Insert floor levelers (GG) into the bottom of bottom
panel (G).
Hardware Used
GG Floor Leveler
AA
7
B
C
x 4
x 4
CC
DD
8
D
x 22
C
9
x 4
G
8
G
FF
G
GG